Hardware Requirements

Label Traxx™ operates as a Client/Server system, which offers complete multi-platform capabilities. This means you can use both Windows and Macintosh computers on the same TCP/IP network to utilize Label Traxx. Label Traxx may also be used as a stand-alone program on one computer as well.

The Label Traxx application is written in the 4th Dimension (4D) database language and uses the 4th Dimension database engine. There are 2 components to the 4th Dimension architecture: the data server application and the client application. The following hardware is required to successfully operate 4D Client and 4D Server:

	Macintosh	Windows
Data Server	Power Mac G4*	Pentium IV 3.0 Ghz or higher*
	1GB or more RAM	1GB or more RAM
	Mac OS X 10.3.9 or higher	Windows XP Professional or higher
	2 hard drives	2 hard drives
	any Monitor	any Monitor

Client	Power Mac G3 or higher	Pentium III 1.0 Ghz or higher
	512MB or more RAM	512MB or more RAM
	Mac OS X 10.3.9 or higher	Windows 2000 or higher
	17" color monitor	17" color monitor

Printer	Any postscript compatible Laser printer.	Any postscript compatible Laser printer.

Network	Ethernet 10/100baseT using the TCP/IP protocol	Ethernet 10/100baseT using the TCP/IP protocol

* A dedicated machine is recommended for the Label Traxx server application. We also suggest having two hard drives so that you can run the operating system and 4D Server application on one drive, and use the second drive for backing up the data file. A tape storage device is also recommended to back up the second hard drive for off-site storage in the event of an emergency.

If you have any questions regarding Label Traxx hardware requirements, or if you would like us to review proposals from hardware vendors, please contact: Tailored Solutions Technical Support at 414-774-9997 or via email: techsupport@tailored.com